HPE FlexFabric 5940 SERIES, Руководство по установке

Страница: 51 / 88

47
Figure 56 Left side panel
(1) Primary grounding point (2) Auxiliary grounding point 1
HPE 5940 48SFP+ 6QSFP+
Figure 57 Front panel
(1) SFP+ port (2) SFP+ port LED
(3) QSFP+ port (4) QSFP+ port LED
(5) System status LED (SYS)
Figure 58 Rear panel
(1) Grounding screw (auxiliary grounding point 2) (2) ACT LED for the management Ethernet port
(3) LINK LED for the management Ethernet port (4) Fan tray 1
(5) Fan tray 2 (6) Power supply 1
(7) Power supply 2 (8) Console port
(9) Management Ethernet port (10) USB port
The HPE 5940 48SFP+ 6QSFP+ switch comes with the two power supply slots empty and a power
supply filler panel as an accessory. You can install one or two power supplies for the switch as
needed. In
Figure 58 , two 300W AC power supplies are installed in the power supply slots. For more
information about installing and removing power supplies, see " Installing/removing a power supply ."
The HPE 5940 48SFP+ 6QSFP+ switch comes with the two fan tray slots empty. You must install two
fan trays of the same model for the switch. In
Figure 58 , two LSWM1HFANSC fan trays are installed
in the fan tray slots. For more information about installing and removing fan trays, see
"
Installing/removing a fan tray ."
1 2