HPE FlexFabric 5710 Series, Руководство по установке

Страница: 14 / 69

10
2.
Align the chassis rails with the rail mounting holes in the chassis:
{
If the mounting brackets are in the port-side mounting position, align the chassis rails with
the screw holes at the rear of the side panels (see
Figure 8 , Figure 9 , and Figure 10 ).
{
If the mounting brackets are in the power supply-side mounting position, align the chassis
rails with the screw holes at the front of the side panels (see
Figure 11 , Figure 12 ,
and Figure 13 ).
3.
Use M4 screws (provided) to attach the chassis rails to the chassis.
Figure 8 Attaching the mounting brackets and chassis rails to an HPE 5710-54HF switch
(mounting brackets installed near the port side)
Figure 9 Attaching the mounting brackets and chassis rails to an HPE 5710-54HT switch
(mounting brackets installed near the port side)
Figure 10
Attaching the mounting brackets and chassis rails to an HPE 5710-30HT switch
(mounting brackets installed near the port side)