HPE Apollo 4530, Руководство по техническому обслуживанию и ремонту

Страница: 26 / 82

Remove the server from the chassis
CAUTION:
Before removing the server, verify that the backup LED is not flashing.
Procedure
1. Power down the server .
CAUTION:
To avoid damage to the server, always support the bottom of the server when removing it from
the chassis.
2. Remove the server from the chassis.
CAUTION:
To avoid damage to the device, do not use the removal handle to carry it.
3. Place the server on a flat, level work surface.
Remove the access panel
Procedure
1. Release the access panel latch.
2. Slide the access panel back about 1.5 cm (0.5 in).
3. Lift and remove the access panel.
26 Remove the server from the chassis