12.
Slide the power supply into the bay until it clicks into place.
Drive options
The different chassis options support SAS, SATA, and NVMe drives. For more information on drive
support, see
Drive bay numbering
.
IMPORTANT:
Depending on the chassis configuration and the components installed in the servers,
it might be necessary to limit the number of drives installed in the chassis. For more information, see
"Temperature requirements" in the server user guide.
Hot-plug drive guidelines
When adding drives to the server, observe the following general guidelines:
• The system automatically sets all device numbers.
• If only one drive is used, install it in the bay with the lowest device number.
• Drives should be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.
54
Drive options
