MF877-00 Page 2
Template Revision A
HPE instructions for this template are available at
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Phillips screwdriver
M3
Nut spinner screwdriver
5mm
Nut spinner screwdriver
5.5mm
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove the CPU board
1. Using a 5.5mm Nut spinner screwdriver, remove the 5pcs nuts attaching the CPU board.
2. Remove the CPU board off the chassis.
3. Repeat for the other CPU board.
2. Remove the spacers
1. Using a 5mm Nut spinner screwdriver, remove the 5pcs spacers under the CPU board.
2. Repeat for the other 5pcs spacers.
3. Remove the mainboard
1. Using a Phillips screwdriver, remove the 12pcs screws attaching the mainboard.
2. Remove the mainboard.
4. Remove the heatsink and bracket on the mainboard
1. Using a Phillips screwdriver, loose the 4pcs screws attaching the heatsink.
2. Remove the heatsink and bracket.
3. Repeat for the other heatsink.
5. Remove the luggage tab.
