HPE 704654-B21, Руководство по настройке безопасности

Страница: 46 / 540

33
To enable SNMP notifications for RADIUS:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enable SNMP notifications
for RADIUS.
snmp-agent trap enable radius
[ accounting-server-down |
authentication-error-threshold |
authentication-server-down |
accounting-server-up |
authentication-server-up ] *
By default, all types of SNMP
notifications are enabled for
RADIUS.
Displaying and maintaining RADIUS
Execute display commands in any view and reset commands in user view.
Task Command
Display the RADIUS scheme
configuration.
display radius scheme [ radius-scheme-name ]
Display RADIUS packet statistics. display radius statistics
Clear RADIUS statistics. reset radius statistics
Configuring HWTACACS schemes
Configuration task list
Tasks at a glance
(Required.) Creating an HWTACACS scheme
(Required.) Specifying the HWTACACS authentication servers
(Optional.) Specifying the HWTACACS authorization servers
(Optional.) Specifying the HWTACACS accounting servers
(Required.) Specifying the shared keys for secure HWTACACS communication
(Optional.) Specifying an MPLS L3VPN instance for the scheme
(Optional.) Setting the username format and traffic statistics units
(Optional.) Specifying the source IP address for outgoing HWTACACS packets
(Optional.) Setting HWTACACS timers
(Optional.) Displaying and maintaining HWTACACS
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure a maximum of 16 HWTACACS schemes. An HWTACACS scheme can be used by multiple
ISP domains.
To create an HWTACACS scheme:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an HWTACACS
hwtacacs scheme
By default, no HWTACACS