HPE 5900 series Скачать руководство пользователя страница 69

Страница: 69 / 75

Management Ethernet port LEDs

A management Ethernet port has one LINK LED and one ACT LED to show its link and data transmission status.

Table 18: Management Ethernet port LEDs description

LED mark

Status

Description

LINK

Off

The management Ethernet port is not connected.

Steady green

The management Ethernet port is operating at 10/100/1000 Mbps.

ACT

Off

The management Ethernet port is not receiving or sending data.

Flashing yellow

The management Ethernet port is sending or receiving data.

10/100/1000Base-T autosensing Ethernet port LEDs

Table 19: 10/100/1000Base-T autosensing Ethernet port LED description

LED status

Description

Steady green

The port has a link and is operating at 1000 Mbps.

Flashing green

The port is sending or receiving data at 1000 Mbps.

Steady yellow

The port has a link and is operating at 10/100 Mbps.

Flashing yellow

The port is sending or receiving data at 10/100 Mbps.

Off

No link is present on the port.

1/10GBase-T autosensing Ethernet port LEDs

Table 20: 1/10GBase-T autosensing Ethernet port LED description

LED status

Description

Steady green

The port has a link and is operating at 10 Gbps.

Flashing green

The port is sending or receiving data at 10 Gbps.

Steady yellow

The port has a link and is operating at 1 Gbps.

Flashing yellow

The port is sending or receiving data at 1 Gbps.

Off

No link is present on the port.

Ports and LEDs

Содержание 5900 series












































































Результаты поиска

Содержание 5900 series

Отзывы:

Похожие инструкции для 5900 series

Бренды по названию

Популярные бренды

HPE 5900 series, Руководство по установке

Результаты поиска

Содержание 5900 series

Отзывы:

Похожие инструкции для 5900 series

Бренды по названию

Популярные бренды