HPC Sigma Control 2, Руководство по обслуживанию

Страница: 14 / 20

9. Press «Enter» to accept the settings.
The display stops flashing and the time (hours/minutes) is set.
6 . 1 b a r 0 8 : 1 5 8 0 . 0 ° C
6 Compressor clock
Current menu
Key clock: ☐
Reset: ☐
·········
01 Mon-Fri 06:30 on
example for weekdays
02 Mon-Fri 12:00 off
example for time
03 Mon-Fri 13:00 on
For example, compressor ON action
10. Press the «Right» key once.
11. Press «Enter» to switch into setting mode.
Column
action on/off flashes.
12. Use «UP» to specify the settings for the compressor ON action.
13. Press «Enter» to accept the setting.
The compressor ON action is setz for the first switching point.
14. Specify further switching points in the same manner.
Result Weekdays, time and the compressor ON / compressor OFF actions are set for all switching points.
Activating the «clock» key.
1. Use «UP» key to change to line
Key clock .
2. Press «Enter» to switch into setting mode.
The check box flashes in the active line.
6 . 1 b a r 0 8 : 1 5 8 0 . 0 ° C
6 Compressor clock
Menu
Key clock: ☑
Active line with check box
Reset: ☐
Resetting all current switching points
·········
01 Mon-Fri 06:30 on
02 Mon-Fri 12:00 off
03 Mon-Fri 13:00 on
3. Use the «UP» key to activate the check box.
4. Press «Enter» to accept the setting.
The «clock» key is activated.
5. Press «Escape» repeatedly to return to the main menu.
6. Press the «clock» key.
■ Proceed in the same manner to deactivate the «clock» key.
■ All defined switching points will be reset simultaneously if you activate the reset check
box.
6 Activating the «clock» key.
8
Quick User Guide Controller
SIGMA CONTROL 2 SCREW FLUID ≥1.1.3
9_9450 03 HCE