HPC MOBILAIR M27 PE, Руководство по эксплуатации

Страница: 85 / 312

Fig. 23 Filling the tank with the correct fuel type
1
Fuel tank cap
2
Correct fuel type
3
Fuel tank
4
Maximum fill level marking
5
Refuelling label
6
Diesel fuel nozzle
➤ Check the correct fuel type and specifications by referring to Table 71.
Fuel / fuel specification Designation / standard
Fuel type Diesel fuel
Recommended fuel specification
EN 590 (1)
Recommended fuel specification
ASTM D975
(2)
(1)
≙ Sales region Europe,
(2)
≙ Sales region USA
Tab. 71 Fuel / fuel specification
Fuel type / specification does not comply with regulations.
➤ Under no circumstances must the fuel tank be filled with the incorrect fuel type.
Further information For more details on the correct fuel specification, see Chapter 2.7.4.
8.3.2 Filling the fuel tank at a pump by means of a refuelling nozzle
Liquid fuels expand at high ambient temperatures. To avoid overflowing, the fuel tank must
not be filled to the brim.
The
maximum fill level is indicated on the fuel tank.
Precondition The machine is standing level.
The machine has cooled down.
The enclosure is open.
All compressed air consumers are disconnected,
the discharge valves are open,
the machine is fully vented, the pressure gauge reads 0 bar.
The negative cable to the battery is disconnected.
The selected fuel meets the requirements specified in Table 71.
1. Loosen and remove the fuel tank cap.
8 Operation
8.3 Refuelling the machine
No.: 9_9548 22 HCE
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
73