HPC MOBILAIR M27 PE, Руководство по эксплуатации

Страница: 170 / 312

2. Unscrew and remove the bung(s) from the service openings.
The liquid will drain.
3. Clean the bungs and service openings.
4. Close all service openings with bungs.
The machine body is sealed.
5. Using the cleaning cloth, remove any dirt within the machine.
Dispose of collected liquid and contaminated working materials according to applicable envi‐
ronmental protection regulations.
10.9.8 Option ga
Generator drive belt maintenance
Correct belt tension is extremely important for the function of the generator and the operational life
of the belt itself.
Use a tensioning mechanism with spring strut, swing frame and tension pulley to ensure correct
belt tensioning. The spring force pushes downward the swing frame with tensioned pulley between
the pulley of the crankshaft and the pulley of the generator of the belt drive and thus generates the
required belt tension.
Material Ratchet 1/2 inch
Spare parts (if required)
Precondition The machine is shut down.
The machine is fully vented, the pressure gauge reads 0 bar.
The machine is cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
WARNING
Beware of rotating pulleys and moving belts.
Touching the moving drive belt may result in severe bruising or even loss of limb or extremi‐
ties.
➤ Check the belt only when the compressor is shut down.
10 Maintenance
10.9 Maintenance of Optional Items
158
Operating Manual Portable Rotary Screw Compressor
MOBILAIR M27 PE
No.: 9_9548 22 HCE