6/21/2010
940
2
Index:
1)
General Information
2)
Selecting the Location
3)
Site Preparation
4)
TK Installation
5)
TK Operation
6)
TK Maintenance
7)
TK Troubleshooting
8)
Warranty
1)
General Information
Please carefully follow the instructions in this manual to prevent personal injury or property loss.
The steps listed as:
WARNINGS Contains information critical to the safe installation and operation of the TK unit.
WARRANTY REQUIREMENT
must be strictly followed to qualify for product warranty
.
Warranty will be void if not followed.
IMPORTANT
Are notes and insights to help ensure product satisfaction and serviceability.
WARNING:
REMOTE CONTROL USE: To prevent accidental start-up from unwanted RF
signals it is the responsibility of the end user to turn off power to electric outlet for the remote
control receiver when the TK is not in use. This should be done via wall switch or breaker.
WARNING:
We suggest that our products be installed and serviced by professionals who are
certified in the U.S. by NFI (National Fireplace Institute) or in Canada by WETT (Wood Energy
Technical Training). Installer must follow all instructions carefully to ensure proper
performance and safety. Hearth Products Controls Company is not responsible for your actions.
WARNING:
It is the responsibility of the installer to follow all local and state codes concerning the
installation and operation of the TK.
WARNING:
Confirm your gas type matches the requirement for the TK- see label on Bottom of the TK.
Gas Pressure: This should be checked prior to use and installaion:
●
Natural Gas Fire Pit:
Supply Pressure:
Minimum: 5.0” W.C.;
Maximum: 7.0” W.C.
●
LP Gas:
Supply Pressure:
Minimum: 10.0” W.C.;
Maximum: 14.0” W.C.
