www.hearthproductscontrols.com
Toll Free: (877) 585-9800 Fax: (877) 433-0704
HOT SURFACE IGNITION FIRE PITS
(All Sizes from 13SS90 HSI to 43FSS300 HSI)
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury, or loss of life
.
Do not store gasoline or other flammable vapors and liquids in vicinity of this or any
other appliance.
What to do if smell gas:
•Do not try to light appliance.
•Do not touch any electrical switch; do not use any phone in vicinity.
•Immediately call your gas supplier from your neighbor’s phone. Follow gas
supplier’s instructions.
•If you can not reach gas supplier, call the fire department.
WARNING: REMOTE CONTROL USE: TO PREVENT ACCIDENTAL START UP
FROM UNWANTED RF SIGNALS, IT IS THE RESPONSIBILITY OF THE END USER
TO TURN OFF POWER TO ELECTRICAL OUTLET FOR THE REMOTE CONTROL
RECEIVER WHEN FIREPIT IS NOT IN USE. THIS SHOULD BE DONE VIA WALL
SWITCH OR BREAKER.
We require that our products be installed and serviced by professionals
who are certified in the U.S. by NFI (National Fireplace Institute) or in
Canada by WETT (Wood Energy Technical Training). Installer must follow
all instructions carefully to ensure proper performance and safety. Hearth
Products Controls is not responsible for your actions.
INSTALLATION PREPARATION
Please carefully follow the steps below when:
1)
Selecting the Location.
2)
Construction of the
Enclosure.
3)
Installation of the Complete Fire Pit
. It is the responsibility of the installer to follow all
Local and State Codes concerning the installation and operation of the fire pit.
4/2/2009
828
1
f i r e - p a r t s . c o m
