HP ZHAN 66 Pro 14 G3, Руководство по техническому обслуживанию и ремонту

Страница: 43 / 98

M.2 solid-state drive
Table 5-5 Solid-state drive descriptions and part numbers
Description Spare part number
512 GB, PCIe, TLC L77261-001
512 GB, PCIe, value L77262-001
512 GB PCIe + 32 GB Optane memory L80984-001
256 GB, PCIe, TLC L77259-001
256 GB, PCIe, value L77260-001
256 GB PCIe + 16 GB Optane memory L80983-001
128 GB, SATA-3, TLC L77258-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 28 ).
2. Place the computer in Battery Safe mode ( Battery Safe mode on page 28 ).
3. Remove the bottom cover ( Bottom cover on page 29 ).
4. Remove the battery ( Battery on page 30 ).
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the computer.
2. Remove the solid-state drive (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
Component replacement procedures 35