HP ZBook x2, Руководство по техническому обслуживанию и ремонту, Страница: 52 / 91

Reverse this procedure to install the front-facing webcam/microphone module.
Rear-facing webcam module
Description Spare part number
Rear-facing webcam module (includes cable and double-sided adhesive) L03251-001
Before removing the rear-facing webcam module, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see Display panel assembly on page 30 ).
5. Remove the front-facing webcam/microphone module (see Front-facing webcam/microphone module
on page 43 ).
Remove the rear-facing webcam module:
1. Release the ZIF connector (1) to which the rear-facing webcam module cable is connected, and then
disconnect the rear-facing webcam module cable from the system board.
2. Detach the rear-facing webcam module (2) from the back cover. (The rear-facing webcam module is
attached to the back cover with double-sided adhesive.)
3. Remove the rear-facing webcam module.
Reverse this procedure to install the rear-facing webcam module.
44 Chapter 5 Removal and replacement procedures