Step 4—Reassembling the workstation
1.
Reinstall the card support, if applicable.
2.
Reinstall the side access panel.
3.
Reconnect power to the workstation and all external devices.
4.
Restore power to the workstation and all external devices.
Step 5—Loading and setting up driver software
For instructions on loading and setting up the drivers for use with your workstation, see the
manufacturer’s documentation shipped with the RAID controller card.
At the time of component installation, look for device firmware and driver updates, designated for your
workstation model and operating system. Obtain updates from http://www.hp.com/go/
workstationsupport.
Step 6—Configuring RAID devices
For detailed instruction on configuring RAID devices, see the service guide for your HP workstation
model at http://www.hp.com/support/workstation_manuals.
Additional information is available at http://www.hp.com/support/RAID_FAQs.
Japanese
日本語
This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then
select your workstation product and select
Japanese
from the drop down
Manual Language
menu.
このドキュメントは日本語版が用意されています。
http://www.hp.com/support/
workstation_manuals
にアクセスし、ご使用のワークステーション製品を選択し、
Manual Language
ドロップダウン
メニューから
Japanese
を選択してください。
10
LSI SAS RAID Host Bus Adapter installation
