manualshive.com logo in svg

HP Z238, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Z238 Скачать руководство пользователя страница 18

2

System management 

This section describes the tools and utilities that provide system management for the workstation.

Topics

Power management and performance features on page 10

BIOS ROM on page 11

Computer Setup (F10) utilities on page 12

Desktop management on page 23

Power management and performance features

ERP compliance mode

This computer provides ERP compliance mode capability.

When enabled, the computer shuts down to the lowest possible power state. The computer must then be 
turned on with the power button. One of the effects is that "wake on LAN" is disabled.

When disabled, the computer powers down conventionally.

Enabling ERP compliance mode

1.

Press 

F10

 during startup.

2.

Using the arrow keys, select the Advanced > Power Management Options, and then select S5 
Maximum Power Savings.

3.

Select Main > Save Change and Exit, and then press 

enter

 to accept the change.

4.

If using Windows, boot to Windows and search in the Start Menu for the setting Choose what 
the power buttons do. Clear Turn on fast startup (recommended). If the check box is not 
available, select Change settings that are currently unavailable at the top of the window.

If using Windows 10, use the taskbar search field to search for Power Options. Select Choose 
what the power button does, then select Turn on fast startup (recommended).

Disabling ERP compliance 
mode

1.

Press 

F10

 during startup.

2.

Using the arrow keys, select Advanced > Power Management Options, then clear S5 
Maximum Power Savings.

3.

Select Main > Save Change and Exit, and then press 

enter

 to accept the change.

4.

If using Windows, boot to Windows and search in the Start Menu for the setting Choose what 
the power buttons do. Check Turn on fast startup (recommended). If the check box is not 
available, select Change settings that are currently unavailable at the top of the window.

If using Windows 10, use the taskbar search field to search for Power Options. Select Choose 
what the power button does, then select Turn on fast startup (recommended).

10

Chapter 2   System management

Содержание Z238




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды