Accessing the Computer Setup (F10) Utility
To access the Computer Setup (F10) Utility menu:
1.
Power on or restart the computer.
2.
As the display first becomes active, press
F10
.
If you do not press
F10
quickly enough at the appropriate time, try again. Turn the computer off,
then on, and press
F10
again to access the utility. You can also press
Ctrl + Alt + Delete
before
starting if you miss the opportunity to press
F10
.
3.
Select the language from the list and press
Enter
.
In the Computer Setup (F10) Utility menu, five headings are displayed: File, Storage, Security,
Power, and Advanced.
4.
Use the left and right arrow keys to select the appropriate heading, use the up and down arrow
keys to select an option, and then press
Enter
.
5.
Choose from the following:
●
To apply and save changes, select
File
>
Save Changes
, and then select
F10=YES.
●
To remove changes you have made, select
Ignore Changes
and then select
F10=YES
.
●
To reset to factory settings, select
File > Default Setup > Restore Factory Settings as
Default
. Press
F10
to accept the changes, and then select
Apply Defaults and Exit
. This
restores the original factory system defaults.
NOTE:
Help screens (accessed by pressing
F1
) are available for many menus in the Computer Setup
(F10) Utility.
CAUTION:
Do not power off the computer while the ROM is saving the Computer Setup (F10) Utility
changes to CMOS memory. A loss of power could corrupt the CMOS memory. After you exit the F10
Setup screen, you can disconnect power from the computer.
ENWW
The Computer Setup (F10) Utility
27
Содержание Z210 Series
Страница 1: ...HP Z210 CMT Workstation Maintenance and Service Guide ...
Страница 4: ...iv About this guide ENWW ...
Страница 12: ...xii ENWW ...