Description
Spare part number
Equipped with 4 GB of system memory, a 32-GB eMMC hard drive (SoC), and a Windows 10 operating
system
855826-601
Equipped with 4 GB of system memory, a 32-GB eMMC hard drive (SoC), and a non-Windows operating
system
855826-001
Thermal Material Kit (includes replacement thermal material)
826599-001
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 26
).
5.
Remove the battery (see
Battery on page 28
).
Remove the system board:
1.
Disconnect the following cables from the system board:
(1) Audio jack board cable ZIF connector on the system board (see
Audio board on page 30
)
(2)Touch ZIF connector on the system board (see
Touch board on page 33
)
(3) TouchScreen cable ZIF connectors on the system board (2 connectors)
(4) Speaker cable (see
Speakers on page 31
)
(5) Antenna cable from terminal on the system board (see
Wireless antenna on page 37
)
(6) Power/volume button board cable ZIF connector on the system board (see
Power/volume button
board on page 38
)
2.
Remove the five screws (1) that secure the system board to the display panel assembly.
System board
35
Содержание x2 210 G1
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 47: ...Reverse this procedure to install the power volume button board Power volume button board 39 ...