2
Windows 2000/XP Operating System
1.
Plug the USB receiver connector to your PC.
2.
The Found New Hardware Wizard appears and the OS will
install the driver automatically. No other steps are necessary.
You are now ready to begin using your wireless keypad
Using the Wireless Calculator/Keypad
Turning the keypad Off and On
To turn on the keypad, press the CE/AC key, located directly
above the number seven key. The keypad starts in calculator mode
and displays “0”.
The keypad automatically turns off itself after two minutes of
non-operation. Or you can press the CE/AC key for two seconds
and it will turn off.
ID setting
Plug the receiver into your notebook’s USB port and turn on the
wireless keypad. The LED of the receiver will start flashing. Press
the ID button under the keypad, the LED will turn off. It means
the ID setting accomplished.
