![HP Vs15 - 15](http://html.mh-extra.com/html/hp/vs15-15-lcd-monitor/vs15-15-lcd-monitor_service-manual_159618014.webp)
Page 13
R15AAC/AAU (vs15)
3)
Trouble shooting
1.
For Power Board
Check output v5V, +12V, +21.5V are right or not
NG
OK
It is not power board problem
Check power switch is turn on or not
OK
NG
Turn switch on
Check power cord (P801), signal cable (P302), P802, P101, P102, P103,
P104 is connected right or not
OK
NG
Check C805 is about DC140V-330V or not
OK
NG
Check C807 is over 11V or not
OK
NG
Connect it right
Check F801, D801, P801 and repair them
Check pin 6 of I801 have same pulse or not
OK
NG
Check pin 1 of T802 have same pulse or not
OK
NG
Check peripheral component of I801 and repair them
Check L805, D804, I801 and repair them
Check peak voltage of R811 triangle pulse is up to 1 volt or not
OK
NG
Check D809, D810, D811, C818. C829, C813, C824, C822, T802 have
same short circuit or the 5V, +12V, +21.5V is over load
OK
NG
Check feedback circuit around I802, I803 and the other components and
repair them
Repair them
Check D804, L805 and repair them
Check Q803, R813, R814, D806, R811, R815 and repair them