manualshive.com logo in svg

HP VMA Series, Инструкция по установке и обслуживанию

Поделиться
Скачать
HP VMA Series Скачать руководство пользователя страница 201

Non-Service Affecting Alarms

HP-AM456-9002A Rev 01

VMA-series Memory Array Installation and Service Guide

201

Port Is Not Running at the Maximum Data Rate 
Possible Alarm

The Port Is Not Running at the Maximum Data Rate Possible alarm occurs when 
the negotiated rate of the connection on the specified port is lower than the 
maximum possible data rate.

This error can occur, for example, when the PCIe card used in the host is not 
compatible with the host computer chipset or if the PCIe extender card in the 
host is not inserted into a PCIe that supports the maximum data rate (e.g. the 
slot is mechanically x8 but electrically x4).

The Alarm LED is not lit when the negotiated rate is x4 or higher, but the alarm 
is logged. If the rate drops to less than x4, service is affected and the Alarm LED 
flashes. 

See 

Booting Suspended, Fan-tray Missing Alarm

 on page 191 for details of what 

happens when PCIe lane negotiation fails.

To clear the alarm, change the PCIe card, host computer, or PCIe slot to 
compatible components.

Power Non-Service Affecting Alarms

There are three non-service affecting power alarms.

•

Power Supply Missing Alarm

 on page 201

•

Power Supply Failure Alarm

 on page 201

•

Power Supply: Polling Failure Alarm

 on page 201

Power Supply Missing Alarm

The Power Supply Missing alarm indicates that a power supply is missing.

Power Supply Failure Alarm

The Power Supply Failure alarm indicates that a power supply has failed.

Power Supply: Polling Failure Alarm

The Power Supply: Polling Failure alarm indicates a failure to poll the specified 
power supply.

Содержание VMA Series













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды