manualshive.com logo in svg

HP VM626A4, Руководство пользователя

Поделиться
Скачать
HP VM626A4 Скачать руководство пользователя страница 36

HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and
saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by
shutting down or reducing power to most internal circuits. This helps protect the LCD panel against
image retention. Image retention can occur when the monitor is left on while displaying the same image
for an extended period of time, leaving a shadow of the image on the screen.

Installing the HP Display LiteSaver Software

1.

Insert the CD in the computer CD-ROM Drive. The CD menu is displayed.

2.

Select 

Install HP Display LiteSaver Software

.

3.

After installing the software, click the 

HP Display LiteSaver

 icon in the Windows system tray or

right-click the icon and select 

Configure

 from the pop-up menu.

4.

Select the following options to configure the HP Display LiteSaver features:

Table 4-3

  HP Display LiteSaver Configuration Options

Select This Option

To Do This

Enable Display LiteSaver

Enables the HP Display LiteSaver functions; deselect to disable the HP Display
LiteSaver.

Display Off

Sets the time when the monitor automatically turns off. This does not affect screen
saver operation, which has priority over the HP Display LiteSaver.

Display On

Sets the time when the monitor automatically turns on. This does not affect screen
saver operation, which has priority over the HP Display LiteSaver.

Activity Extension

Sets the time in minutes before the monitor turns off if there is any keyboard or mouse
activity after the Display Off time is reached. If the keyboard or mouse is used, then
HP Display LiteSaver waits until the set amount of time before turning the display
off again. Set to 0 to disable. If disabled, the monitor will turn off as soon as the
Display Off time is reached, regardless of keyboard or mouse activity.

Show 1 minute Display Off Notice

Displays a popup message in the system tray 1 minute before the monitor is turned
off by HP Display LiteSaver.

Status

Shows the time until the monitor is next due to be turned off by HP Display LiteSaver.

OK

Stores the current settings and minimizes HP Display LiteSaver to the System Tray.

Cancel

Restores the previous settings and minimizes HP Display LiteSaver to the System
Tray. HP Display LiteSaver will continue to run.

Help

Opens the online help file.

Exit

Exits and closes the HP Display LiteSaver. It will no longer control the monitor power
until it is next run.

View 

HP Display LiteSaver Readme

 on the CD for additional information on how to configure HP Display

LiteSaver.

28

Chapter 4   Operating the Monitor

ENWW

Содержание VM626A4






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды