HP Visualize J2240, Инструкции по обновлению

Страница: 6 / 42

v
Emissions Regulations Compliance
Any third–party I/O device installed in HP system(s) must be in accordance with the
requirements set forth in the preceding Emissions Regulations statements. In the
event that a third–party noncompliant I/O device is installed, the customer assumes
all responsibility and liability arising therefrom.
Electrostatic Discharge (ESD) Precautions
Electrostatic charges can damage the integrated circuits on printed circuit boards. To
prevent such damage from occurring, observe the following precautions when un-
packing and installing the board.
Stand on a static–free mat.
Wear a static strap to ensure that any accumulated electrostatic charge dis-
charges from your body to ground.
Connect all equipment together, including the static–free mat, static straps,
routing nodes, and peripheral units.
Keep uninstalled printed circuit boards in their protective antistatic bags.
Handle printed circuit boards by their edges, once you have removed them
from their protective antistatic bags.