HP Vectra VL6 8, Руководство по установке

Страница: 9 / 36

2 Connecting to a Netware 4.11 Server
Windows 95 SR2
Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2 installed.
• IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.04.
• Driver Name: Windows 95 Default
• Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX,
and NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI
Diagnostic Disk) and power on the machine.
3 After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4 Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5 Upon booting, Windows 95 will automatically recognize the adapter. Click
on “Next.”
6 When prompted, click on “Other Locations.”
7 Insert drivers disk 4 of 5 (Auto LANStreamer PCI NDIS 3.0 Driver
Diskette), set the path to “A:\” and click “OK.”
(If you have an HP preloaded HDD, set the path to
“C:\MASTERS\LAN\LNSTRM\DISK4\”)
8 Verify that “IBM Auto LANStreamer PCI Adapter (NDIS3)” is listed and
click on “Finish.”
9 When prompted to insert disk labeled “IBM Streamer Family Adapter
Option Diskette”, click on “OK.”
Vectra VE8 Vectra VL7 Vectra VE7/VE8
Interrupt 11 11(12) 11(10)
I/O Address F800-h C800-h DC00-h