Connecting to a Netware 4.1 server
Windows for Workgroups
8
Accept the default installation options by pressing “F10.”
9
At the “Customize Support for Windows” screen, press “F10.”
10
Select 32-bit LAN Drivers and hit the enter key.
11
Page down the Board Drivers list to “USER SPECIFIED 32 BIT DRIVER
LIST” and hit enter.
12
Insert the 3COM Etherlink 3C905 Ethernet card and drivers disk 2, set the
path to “A:\Client32\” and press enter.
13
Select “3Com Fast Etherlink XL / Etherlink XL” and press enter.
14
Accept the default frame types press “F10” to continue, and verify the
following entries for the “Installation Configuration Summary”:
15
YES
16
C:\NOVELL\CLIENT32
17
C:\WINDOWS
18
32-bit LAN drivers
19
3Com Fast Etherlink XL / Etherlink XL Driver
20
Press “F10” to save and continue.
21
When prompted, insert the corresponding disks to complete file transfer
and driver installation.
22
When the install utility is finished, press <CRTL><ALT><DEL> to restart
the machine.
23
After Windows loads, open the “NETWORK” folder and double-click the
“NETWORK SETUP” icon.
24
Select “Networks” and verify that “Novell Netware (Workstation Shell 4.0
and above)” is listed under “Install Windows support for the following
network only:”
25
Click on “OK” twice and the installation is complete.
c905.bk : ch_3.fb4 Page 3 Thursday, October 22, 1998 9:51 AM
Содержание Vectra VL6 7
Страница 1: ...Fast Etherlink XL TX PCI Network Interface Card 10 100BT 3C905 TX Installation Guide ...
Страница 41: ...c905 bk bcover fb4 Page xxxvii Thursday October 22 1998 9 51 AM ...
Страница 42: ...Version Number 3COM 905 Rev 1 c905 bk bcover fb4 Page xxxviii Thursday October 22 1998 9 51 AM ...