Installing the UPG 173RM173A 1U Rackmount
Console
1.
Align the UPG 1U Adjustable Toolless Rails with the holes marked on the rack, and snap them into place.
a.
Snap one end of the UPG 1U Adjustable Toolless Rail into the retma rail.
b.
Extend the other half of the UPG 1U Adjustable Toolless Rail to meet the appropriate rack depth, and
snap into place.
NOTE:
If the UPG 1U Adjustable Toolless Rails do not snap into place, be sure that they align with
the holes marked on the rack. The holes marked on the rack must be in the same location for the
front and rear of the rack.
