background image

<Bold Header> 

Legal and notice information

© Copyright 2004—Hewlett-Packard Development Company, L.P.

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of 

merchantability and fitness for a particular purpose.

 Hewlett-Packard shall not be liable for errors contained herein or direct, 

indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this document.

This document contains proprietary information which is protected by copyright. All rights reserved. No part of this document may 

be photocopied, reproduced or translated to another language without the prior written consent of Hewlett-Packard.

Revision history

This document is frequently revised and updated. To find out if there is a later version, please ask your HP OEM Representative.

Version

Date

Changes

Edition 6

September 2004

Generation 3 SCSI and FC drive version

Edition 6.1

December 2004

Reformatted and updated

Содержание Ultrium Drive









































Отзывы: