HP U28, Руководство по техническому обслуживанию и ремонту

Страница: 16 / 22

14
4) Remove aluminum tape and backlight wire. Tear off the three aluminum tape at the yellow square, and then pull
out the backlight wire from the interface (when you take out the backlight wire, hold down the backlight wire
connector), and remove the backlight wire from the hook, as shown in the blue square.
5) Remove the screws of the shielding cover. Take the electric screwdriver and remove the three screws, at the red
circle, and then remove the two black foams at the blue square.
6) Remove FFC cable. Lift the shielding cover and pull out the FFC cable (to pull out the FFC cable, you need to
pinch both sides of the blue circle, and then pull it out), and place the shielding cover aside.