Bluetooth module
Description
Spare part number
Bluetooth module (includes Bluetooth module cable)
412766-002
Before removing the Bluetooth module, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery on page 36
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive on page 38
)
b
.
Optical drive (see
Optical drive on page 42
)
c
.
Keyboard (see
Keyboard on page 47
)
d
.
Switch cover (see
Switch cover on page 50
)
e
.
Display assembly (see
Display assembly on page 52
)
f
.
Top cover (see
Top cover on page 59
).
Remove the Bluetooth module:
1
.
Disconnect the Bluetooth module cable
(1)
from the system board.
2
.
Remove the Phillips PM2.0×3.0 screw
(2)
that secures the Bluetooth module to the system board.
3
.
Remove the Bluetooth module
(3)
.
Reverse this procedure to install the Bluetooth module.
ENWW
Component replacement procedures 65