
3.
Remove the fan/heat sink assembly
(3)
.
NOTE:
Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
NOTE:
The thermal material should be thoroughly cleaned from the surfaces of the fan/heat sink
assembly
(1)
and the system board components
(2)
each time the fan/heat sink assembly is
removed. Replacement thermal material is included with all system board, fan/heat sink assembly,
and processor spare part kits. A separate thermal pad kit is also available using spare part number
634256-001.
Reverse this procedure to install the fan/heat sink assembly.
68
Chapter 4 Removal and replacement procedures
Содержание TouchSmart tx2-1000 - Notebook PC
Страница 1: ...HP TouchSmart tx2 Notebook PC Maintenance and Service Guide ...
Страница 4: ...iv Safety warning notice ...
Страница 123: ......