HP TouchSmart tx2-1000 - Notebook PC, Руководство пользователя

Страница: 23 / 30

The computer does not detect the optical drive
If the computer does not detect the optical drive, use Device Manager to troubleshoot the device and
then update, uninstall, or disable the device driver:
1. Remove any discs from the optical drive.
2. Select Start > Control Panel > System and Maintenance > Device Manager . If prompted by
User Account Control, click Continue .
3. In the Device Manager window, click the plus sign (+) next to DVD/CD-ROM drives , unless a minus
sign (-) is already showing. Look for an optical drive listing.
NOTE: If the drive is not listed, install (or reinstall) the device driver as instructed. Refer to “A
device driver must be reinstalled” later in this section.
4. Right-click the optical drive listing to perform the following tasks:
●
Update the driver.
● Disable the device.
●
Uninstall the device.
● Scan for hardware changes. Windows scans your system for installed hardware and installs
any required drivers.
●
Click Properties to see if the device is working properly:
◦ Click Troubleshoot to fix problems.
◦
Click the Driver tab to update, disable, or uninstall drivers for this device.
NOTE: You can click the Roll Back Driver option if the device fails after updating the
driver. This option rolls back to the previously installed driver.
A disc does not play
●
Save your work and close all open programs before playing a CD or a DVD.
●
Log off the Internet before playing a CD or a DVD.
●
Be sure that you insert the disc properly.
●
Be sure that the disc is clean. If necessary, clean the disc with filtered water and a lint-free cloth.
Wipe from the center of the disc to the outer edge.
●
Check the disc for scratches. If you find scratches, treat the disc with an optical disc repair kit
available at many electronics stores.
●
Disable Sleep mode before playing the disc.
Do not initiate Hibernation or Sleep while playing a disc. Otherwise, you may see a warning
message asking if you want to continue. If this message is displayed, click
No . After you click No,
the computer may behave in either of the following ways:
◦
Playback may resume.
The computer does not detect the optical drive 19