Hard drive
NOTE:
The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar
cover.
Description
Spare part number
640-GB, 5400-rpm
611495-001
500-GB, 7200-rpm
584381-001
320-GB, 7200-rpm
584380-001
250-GB, 7200-rpm
584379-001
Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws)
584382-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery on page 35
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 captive screws that secure the hard drive cover to
the computer.
Component replacement procedures
37
Содержание TOUCHSMART TM2
