2
1.Dissamble 4screws on left/right speaker vertically.
3
6
4
5
Disassemble 3 screw on AMP card vertically (as pic)Put them in screw
box
Tear heat sink pad from base pan.
As pic,take MB from BASE PAN and put it in material
temporary storage.
Note:Don't touch component.
Pull out speaker cable from AMP connector vertically.
2.Take left/right speaker,check speaker no broken ,no
deformed.
1
Disassemble 6 screw on M/B vertically,put them in screw
box.
