Removal and Replacement Procedures
HP TFT5110R Maintenance and Service Guide
3-9
HP CONFIDENTIAL
Codename: Pug Part Number: 292490-001 Last Saved On: 10/23/02 10:13 AM
Removing the AC Brick
To remove the AC brick:
1. Disconnect all cables from their source.
2. Remove the rear cover.
3. Unplug the AC brick connector from the controller board and lift the brick off of
the Velcro pad.
Figure 3-8: Removing AC brick
IMPORTANT:
Be sure the AC brick is properly located on the Velcro pad so that the rear cover can
be installed.
To replace the AC brick, reverse the above procedure.
