manualshive.com logo in svg

HP TFT5110R, Руководство пользователя

Поделиться
Скачать
HP TFT5110R Скачать руководство пользователя страница 50

HP TFT5110R User Guide 

C-1

 

  

HP CONFIDENTIAL

 

Writer: Amy L. Laffitte File Name: h-appc Power Cord Requirements 

Codename: Pug Part Number: 292491-002 Last Saved On: 10/25/02 9:47 AM 

C 

Power Cord Requirements 

The power cord set meets the requirements for use in the country where you 
purchased the equipment. The voltage selection switch allows you to select the 
appropriate line voltage for the server. 

Power cord sets for use in other countries must meet the requirements of the country 
where you use the server. For more information on power cord set requirements, 
contact your HP authorized dealer. 

General Requirements 

The requirements listed below are applicable to all countries: 

• 

The length of the power cord must be at least 1.8 m (6.0 feet) and a maximum of 
3.7 m (12 feet). 

• 

The power cord set must be approved by an acceptable accredited agency 
responsible for evaluation in the country where the power cord will be used. 

• 

The power cord set must have a minimum current capacity and nominal voltage 
rating of 10 A/125 volts AC, or 10A/250 volts AC, as required by the power 
system of each country. 

• 

The appliance coupler must meet the mechanical configuration of an 
EN60320/IEC 320 Standard Sheet C13 Connector, for mating with the appliance 
outlet on the computer. 

Содержание TFT5110R
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды