2.
Push the compartment cover about .6 cm (1/4 inch) toward the front of the unit (2) and lift it off
the unit (3).
Figure 2-1
Removing the secure USB compartment cover
Replacing the Secure USB Compartment Cover
To replace the secure compartment cover:
1.
Place the cover on top of the unit so it is offset about 0.6 cm (1/4 inch) toward the front of the
unit, allowing the tabs on the cover to align with the slots on the chassis (1).
2.
Slide the cover toward the back of the unit until the cover is flush with the chassis (2).
3.
Replace the screw (3).
Figure 2-2
Replacing the secure compartment cover
Removing and Replacing the Side Access Panel and
Metal Side Cover
Removing the Side Access Panel and Metal Side Cover
WARNING!
Before removing the side access panel, ensure that the thin client is turned off and the
power cord is disconnected from the electrical outlet.
12
Chapter 2 Hardware Changes
Содержание t510
Страница 1: ...Hardware Reference Guide HP t510 Thin Client ...
Страница 4: ...iv About This Book ...
