HP T2200 XR Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 53

background image

Regulatory Compliance Notices

A-2

HP Uninterruptible Power System T2200 XR Models User Guide

Class B Equipment

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit that is different from that to which the
receiver is connected.

•

Consult the dealer or an experienced radio or television technician for help.

Declaration of Conformity for Products Marked with the FCC Logo,
United States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

For questions regarding your product, contact us by mail or telephone:

•

Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000

•

1-800-652-6672 (For continuous quality improvement, calls may be recorded or
monitored.)

For questions regarding this FCC declaration, contact us by mail or telephone:

•

Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000

•

1-281-514-3333

To identify this product, refer to the part, series, or model number found on the product.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Hewlett-Packard Company may void the user’s
authority to operate the equipment.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
38
39
40
41
42
...
»

Содержание T2200 XR






















































Отзывы:

Нет отзывов

Похожие инструкции для T2200 XR

Бренд: OSEE Страницы: 12

Бренд: Laney Страницы: 16

Бренд: Bazooka Страницы: 10

Бренд: JBL Страницы: 28

Бренд: ifi Страницы: 23

C Series C 10 4X

Бренд: Lab.gruppen Страницы: 7

ProMedia DD-5.1

Бренд: Klipsch Страницы: 34

Бренд: Focal Страницы: 8

Бренд: DAPAudio Страницы: 15

Бренд: Sansui Страницы: 32

Бренд: Surpass Страницы: 14

Бренд: Atlona Страницы: 8

Бренд: Soundigital Страницы: 14

Бренд: Inline Страницы: 11

Бренд: Inter-m Страницы: 20

Бренд: Kicker Страницы: 12

The One Limited Edition Amplifier

Бренд: Phoenix Gold Страницы: 8

Бренд: Arcam Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды