HP Synergy 480 Gen9, Руководство по техническому обслуживанию и ремонту, Страница: 39 / 71

Removing and replacing a storage controller
To remove the component:
Procedure
1. Power down the compute module .
2. Remove the compute module .
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Remove the front panel/drive cage assembly .
6. Remove the storage controller.
To replace the component, reverse the removal procedure.
Removing and replacing a heatsink
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
To remove the component:
Procedure
1. Power down the compute module .
2. Remove the compute module .
3. Place the compute module on a flat, level work surface.
4. Remove the access panel .
5. Remove all DIMM baffles .
6. Remove the heatsink.
Removing and replacing a storage controller 39