manualshive.com logo in svg

HP Surestore Tape Library Model 10/588, Руководство по оборудованию

Поделиться
Скачать
HP Surestore Tape Library Model 10/588 Скачать руководство пользователя страница 61

  

3-17

 

Operating in Manual Mode

Mounting a DLT Cartridge into a Drive

CAUTION:

Before you mount a cartridge into the drive, you must make sure that 
power is on, and that the Operate Handle indicator is on. Use the drive 
shuttle to operate, not the drive handle.

A safety mechanism protects the drive if you try to operate it in an 
incorrect state. The shuttle will not operate if this mechanism is 
activated. To reset the safety mechanism, wait for the Operate Handle 
indicator to turn on. Pull firmly on the shuttle, then push the shuttle in 
completely. If the cartridge did not eject, or if the handle did not rise, pull 
and push again. 

To mount a cartridge into a drive:

1. Obtain the cartridge VOLSER, location, and drive number using the LSM 

management software. 

2. Open the LSM right front door by using a latch key to unlock the top and 

bottom latches. Refer to 

Figure 3-3

. 

3. Open the LSM left front door. For the standard door, pull gently from the 

top right corner. For the expansion door, pull from the recessed area on the 
right side. 

4. Locate the cartridge. 

5. Make sure that the DLT handle is up and the cartridge handle hook and hub 

are down. 

Figure 3-11

 shows the handle positions. 

CAUTION:

You must insert the cartridge properly or you will damage the drive. 
Make sure that the cartridge has a readable VOLSER. 

6. Hold the cartridge so that the VOLSER is facing you and the write-protect 

switch is on the right side of the cartridge. Refer to 

Figure 3-13

.   

7. Insert the cartridge into the shuttle and push the cartridge into the back of 

the drive until it is firmly seated.

8. Push the shuttle all the way back, pause for about two seconds, then release 

the shuttle.

CAUTION:

If the cartridge has been ejected from the drive, you must remove it from 
the shuttle before you can reload it into the drive. Otherwise, the shuttle 
will become jammed by simultaneously holding onto the cartridge and 
lowering the handle. If this happens, release the cartridge from the 
shuttle latch under the right side of the cartridge. Then push the 
cartridge into the drive and lower the handle. 

Содержание Surestore Tape Library Model 10/588































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды