Chapter 3
Installing the HP Support Anywhere Software
49
Table 4: Terminal Emulation Settings
Setting
Recommended
Alternate
Emulation
ANSI Color
Monochrome ANSI/VT-100
Character Set
Extended PC/IBM PC
ANSI
Screen Dimensions
80 x 25
80 x 24
Line Wrap
OFF
Local Echo
OFF
Scroll
ON
Carriage Return
Translation
None
Backspace Translation
None
Cursor
Underline, blinking
Installing and Configuring pcANYWHERE32 at the Remote Console
Although there are several connection options, typically you access the HP
NetServer via a modem. Unless you have decided to use another communications
package, you need to install the pcANYWHERE32 to enable character-based
console redirection at a remote workstation. Note that pcANYWHERE32 console
software is included with the HP NetServer E 40 and E 45.
To install pcANYWHERE32 at the remote console:
1. Insert the HP NetServer Navigator CD-ROM in the CD-ROM drive, or a
master copy of the pcANYWHERE32 "Pre-Install" diskette into drive A.
Choose Run from the File menu in Program Manager, or the Start menu
in Windows 95.
2. Enter one of the following commands:
◊
If you are installing from the CD, enter:
x:\HPSA\US\PCA32\CONSOLE\PREINST\SETUP.EXE
where
x
: is the drive letter of the CD-ROM drive.
◊
If you are installing from a master diskette, enter:
a:setup
Follow the on-screen instructions to complete installation of
pcANYWHERE32.
3. After pcANYWHERE32 is installed, restart Windows NT or Windows 95.
