manualshive.com logo in svg

HP Stream x360, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Stream x360 Скачать руководство пользователя страница 46

WLAN module

Description

Spare part number

Intel Dual Band Wireless-AC 7265 802.11 AC 2×2 WiFi + Bluetooth 4.2 Combo Adapter (non vPro)

793840-005

Intel Dual Band Wireless-AC 3168 802.11 AC 1×1 WiFi + Bluetooth 4.2 Combo Adapter (non vPro)

863934-855

Realtek RTL8723BE-VB 802.11b/g/n 1×1 WiFi + Bluetooth 4.0 Combo Adapter

855106-855

Realtek RTL8822BE 802.11 ac 2x2 WiFi + BT 4.2 Combo Adapter

924813-855

Realtek RTL8821CE 802.11 ac 1x1 WiFi + BT 4.2 Combo Adapter

L17365-005

Realtek RTL8723DE 802.11 bgn 1x1 WiFi + BT 4.2 Combo Adapter

L21480-005

CAUTION:

To prevent an unresponsive system, replace the wireless module only with a wireless module 

authorized for use in the computer by the governmental agency that regulates wireless devices in your 
country or region. If you replace the module and then receive a warning message, remove the module to 
restore device functionality, and then contact technical support.

Before removing the WLAN module, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 28

).

5.

Disconnect the battery cable from the system board (see 

Battery on page 30

).

Remove the WLAN module:

1.

Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

NOTE:

The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/

black WLAN antenna cable connects to the WLAN module #1/Aux terminal.

2.

Remove the Phillips PM2.0×3.3 screw (2) that secures the WLAN module to the keyboard/top cover. 
(The WLAN module tilts up.)

38

Chapter 5   Removal and replacement procedures

Содержание Stream x360
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды