HP StorageWorks Q2300, Руководство по установке

Страница: 31 / 42

Q2300 PCI-X host bus adapter for Itanium Linux systems installation guide 31
Table 5 describes the Driver Configuration components.
Table 5 Driver Configuration menu components
Menu Option Description
NVRAM Parameters
1. Edit Adapter Settings Displays the Edit Adapter Settings menu.
2. Edit Advanced Settings Displays the Edit Advanced Settings menu.
3. Edit Database Displays the Edit Database screen.
4. Edit Boot Settings Displays the Edit Boot Settings menu.
Information
5. Show Database Displays the contents of the WWN database in table form.
6. Show Translation Displays the SCSI target id translation table. This table is a list of SCSI
tid and fibre channel loop id mapping pairs. Each entry in the table
consists of the following for each device:
•
SCSI id (tid)
•
Fibre channel loop id (lid)
•
World wide port name (WWPN)
•
World wide node name (WWNN)
All numbers are in hexadecimal. Tid values from
0x00
to
0x0A
are
persistent, and tid values greater than
0x0A
are assigned
sequentially as devices are discovered. Tid values greater than
0x80
are fabric-attached while those below
0x7F
are
arbitrated-loop-attached.
7. Show NVRAM Buffer Displays the contents of the local NVRAM buffer in hexadecimal. This
is the local buffer containing changes made prior to using the Write
selection to commit them to the HBA’s NVRAM.
8. Info Displays the following HBA information:
•
EFI device path
•
Port WWPN
•
Serial number
•
SSVID and SSDID from NVRAM
Use the device path to determine which HBA configuration is displayed.
9. Help Displays a brief description of the menu selections.