HP StorageWorks NAS e7000 v2, Быстрый старт

Страница: 51 / 70

Beyond Initial Setup
51 NAS e7000 v2 Quick Start Guide
Checklists for Cluster Server Installation
The following will assist in preparing for installation. Step-by-step instructions
begin after these items have been discussed.
■
Network Requirements
■
Shared Disk Requirements
Network Requirements
■
A unique NetBIOS cluster name.
■
Seven unique, static IP addresses: two for the network adapters on the private
network, two for the network adapters on the public network, two for the
virtual server resources, and one for the cluster itself.
■
A domain user account for Cluster service (all nodes must be members of the
same domain).
■
Each node should have two network connections—one for connection to the
public network and the other for the node-to-node private cluster network. If
only one network adapter for both connections is used, the configuration is
not supported. A separate private network adapter is required for HCL
certification.
Shared Disk Requirements
Note: Do not let both nodes access the shared storage devices at the same time until
Cluster service is installed on at least one node and that node is online. This can be
accomplished through selective storage presentation, SAN switch zoning or having only
one node online at all times.
■
All software components listed in the SAN connection tool must be installed
and the fiber cables attached to the HBA(s) before the cluster installation is
started.
■
All shared disks must be accessible from both nodes, but not at the same time.
See the previous note.
■
All shared disks must be configured as basic (not dynamic).
■
All partitions on the disks must be formatted as NTFS.