manualshive.com logo in svg

HP StorageWorks MSA20, Руководство по установке

Поделиться
Скачать
HP StorageWorks MSA20 Скачать руководство пользователя страница 4

Cabling

12

Connect the AC input socket of each disk array
power supply to an AC power source.
Hardware installation is complete. You may now
power up the disk array(s) and then the node as
described in the 

HP StorageWorks 6000 Virtual

Library System User Guide

.

4

3

1

2

11

Connect the VHDCI connector on the disk array to
the appropriate VHDCI connector on the node as
shown.

1. VHDCI connector A1, connect to disk array 1
2. VHDCI connector A2, connect to disk array 2
3. VHDCI connector B1, connect to disk array 3
4. VHDCI connector B2, connect to disk array 4

9

Align the disk array with the rails, and slide it
into the rack.

1

2

10

Remove the
mounting
bracket
covers, and
tighten the
thumbscrews
to secure the
disk array to
the rack.
Replace the
mounting
bracket
covers.

© Copyright 2005 Hewlett-Packard Development Company, L.P.

First Edition (May 2005)

Part Number: AF728-96002

*AF728-96002*

AF728-96002

Содержание StorageWorks MSA20

Страница 1: ...rounded when touching static sensitive components 1 Inspect the box contents You will also need a Phillips screwdriver Warning The MSA20 disk array weighs 24 kg 53 lb full At least two people are required to lift and rack mount the disk array Warning To reduce the risk of personal injury or damage to the equipment before installing equipment be sure that The rack leveling jacks are extended to the...

Страница 2: ...assword 3 Initiate a shutdown of the VLS by entering shutdownSystem and then press Enter 4 When the VLS has completed its shutdown operation press the node Power On Standby button to place the node in standby mode When the node activates standby power mode the system power LED changes to amber 2 If you are installing a capacity bundle or an existing disk array to the VLS base configuration install...

Страница 3: ...ide to the required location of the locking latches in this case Warning The pins in the rails are load bearing Do not remove the pins except to replace them with the pins for round hole racks 6 If the holes in the rack uprights are round instead of square remove the standard pins from the rails and replace them with the round hole pins provided in the rack mounting hardware kit Identify the left ...

Страница 4: ...onnector on the node as shown 1 VHDCI connector A1 connect to disk array 1 2 VHDCI connector A2 connect to disk array 2 3 VHDCI connector B1 connect to disk array 3 4 VHDCI connector B2 connect to disk array 4 9 Align the disk array with the rails and slide it into the rack 1 2 10 Remove the mounting bracket covers and tighten the thumbscrews to secure the disk array to the rack Replace the mounti...

Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды