Troubleshooting
32
FCA2684/FCA2684DC PCI-X Host Bus Adapters for OpenVMS and Tru64 UNIX Installation
POST LED states
lists the HBA LED states with descriptions of each state.The location of
the POST LED indicators is defined in
on
If the LEDs indicate a failure during POST:
1. Make sure that the HBA is seated firmly in the PCI slot.
2. Verify that the fibre cable connection to the HBA is secure.
Table 6: POST LED states
Amber LED (L1)
Green LED (L2)
Description
Off
Off
Wake-up failure (dead board)
On
Off
POST failure (dead board)
Slow blink (1 Hz)
Off
Wake-up failure (dead board)
Fast blink (4 Hz)
Off
Failure in POST (dead board)
Flashing (irregular)
Off
POST processing in progress
Off
On
Failure while functioning
On
On
Failure while functioning
Slow blink (1 Hz)
On
Normal—1 Gb link rate
Fast blink (4 Hz)
On
Normal—2 Gb link rate
Off
Blink (1 Hz)
Normal—link down or not yet
started
