Installation
22
FCA2684/FCA2684DC PCI-X Host Bus Adapters for OpenVMS and Tru64 UNIX Installation
Verifying the installation
To verify that the HBA is properly installed and is operating:
1. Turn on the computer.
2. At power up, observe the Power On Self Test (POST) LED indicators on the
HBA. The position of the POST LED indicators is defined in
on page 13. The green LED indicates power functions,
and the amber LED signifies port activity. The amber LED blinks at all times
during normal operation.
lists indications you may see after
installation.
Amber LED (L1)
Green LED (L2)
State
Configuration guidelines
The driver is provided as part of Tru64 or Open VMS, or as part of their
associated patch kits. For information on supported configurations specific to
your operating system and topology, refer to:
■
FCA2684/FCA2684DC PCI-X Host Bus Adapters for Open VMS and Tru64
Release Notes
■
HP StorageWorks SAN Design Guide available at
http://h18006.www1.hp.com/storage/saninfrastructure.html
Table 4: Normal POST LED indicators
Amber LED (L1)
Green LED (L2)
State
Flashing (irregular)
Off
POST processing in progress
Slow blink (1 Hz)
On
Normal—1 Gb link rate
Fast blink (4 Hz)
On
Normal—2 Gb link rate
Off
Blink (1 Hz)
Normal—link down or not yet started
