HP StorageWorks DLT80 Скачать руководство пользователя страница 10

Страница: 10 / 74

About this Guide

DLT80 Tape Drive Reference Guide

Caution:

Text set off in this manner indicates that failure to follow directions

could result in damage to equipment or data.

Note:

Text set off in this manner presents commentary, sidelights, or interesting points

of information.

Equipment Symbols

The following equipment symbols may be found on hardware for which this guide
pertains. They have the following meanings.

Any enclosed surface or area of the equipment marked with these

symbols indicates the presence of electrical shock hazards. Enclosed

area contains no operator serviceable parts.

WARNING:

To reduce the risk of personal injury from electrical shock

hazards, do not open this enclosure.

Any RJ-45 receptacle marked with these symbols indicates a network

interface connection.

WARNING:

To reduce the risk of electrical shock, fire, or damage to the

equipment, do not plug telephone or telecommunications connectors

into this receptacle.

Any surface or area of the equipment marked with these symbols

indicates the presence of a hot surface or hot component. Contact with

this surface could result in injury.

WARNING:

To reduce the risk of personal injury from a hot component,

allow the surface to cool before touching.

Содержание StorageWorks DLT80











































































Результаты поиска

Содержание StorageWorks DLT80

Отзывы:

Похожие инструкции для StorageWorks DLT80

Бренды по названию

Популярные бренды

HP StorageWorks DLT80, Справочное руководство

Результаты поиска

Содержание StorageWorks DLT80

Отзывы:

Похожие инструкции для StorageWorks DLT80

Бренды по названию

Популярные бренды