Operating the DLT VS 40/80 Tape Drive
41
DLT VS 40/80 GB Tape Drive Reference Guide
describes the meaning of the front panel LEDs.
Table 2: Indicator Activity
Indicator
State
Operating Condition
Drive error (amber)
Blinking
An unrecoverable drive error or a
POST error has occurred. Call
Technical Support.
Off
No drive errors.
Ready (green)
On
Power to the drive.
Off
No power to the drive.
Blinking (constant
period & duty cycle)
Tape is in motion.
Blinking (dual period
& duty cycle)
Reserved.
Clean/Media (amber) Blinking
■
A hard read/write error that
is probably recoverable has
occurred. Clean the drive.
The LED is off after
completing a cleaning cycle
with a DLT1/DLT VS
Cleaning Cartridge after
loading a properly formatted
data cartridge into the drive.
Cycling the power on the
drive also turns off the LED.
■
An inappropriate tape has
been loaded into the drive.
The tape should
automatically eject.
■
The drive has exceeded 150
tape motion hours. The drive
must be cleaned. Cycling the
power on the drive does not
turn off the LED.
Off
Cleaning is not required.
All three LEDs
On
POST is starting.
Blinking
Firmware upgrade in progress.
External power LED
On
Power to the drive.
Off
No power to the drive.
Содержание StorageWorks DLT VS 40
