HP StorageWorks D2700 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 80

background image

Powering off disk enclosures

CAUTION:

Be sure that the server is the first unit to be powered down and the last to be powered back up. Taking
this precaution ensures that the system does not erroneously mark the disk drives as failed when the
server is powered up.

IMPORTANT:

If installing a hot-plug device, it is not necessary to power down the enclosure.

To power off a disk enclosure:

1.

Power down any attached servers. See the server documentation.

2.

Power down the disk enclosures. Press and hold the power on/standby button on the rear of the
disk enclosure for three seconds or until the system power LED changes from green to amber.

3.

Disconnect the power cords.

The system is now without power.

Updating disk enclosure firmware

After initial installation and periodically after that, verify that the controller, disk enclosure, and disk
drives are running on the latest available firmware. You can identify currently installed firmware
versions through the HP SIM and ACU software utilities.

Firmware updates on the controller, disk enclosure and disk drives, are performed using HP Smart
Components. For more information, see “

Smart Components for firmware updates

” on page 46.

IMPORTANT:

Before installing new firmware on the disk enclosure, be sure to study the release notes and installation
instructions provided with the firmware.

To receive proactive support alerts, such as Customer Advisories, as well as updates on drivers,
software, firmware, and customer replaceable components via e-mail, subscribe to HP Subscriber’s
Choice. Sign up for Subscriber’s Choice at the following HP website:

nl

http://www.hp.com/go/e-updates

Operation and management

48

«
...
46
47
48
49
50
...
»

Содержание StorageWorks D2700

















































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks D2700

Бренд: IBM Страницы: 44

Бренд: Black Box Страницы: 19

StorCase Technology Data Express DE75i-A

Бренд: Kingston Technology Страницы: 33

Бренд: Bartec Страницы: 4

Бренд: Hyperion Страницы: 8

Бренд: iseg Страницы: 20

Бренд: CRU Страницы: 4

Бренд: SFF time Страницы: 19

Бренд: CRU Страницы: 12

Mercury On-The-Go Pro

Бренд: OWC Страницы: 8

Бренд: Eaton Страницы: 2

Grand Touring GTO1204BR

Бренд: JBL Страницы: 2

Бренд: Paw Brothers Страницы: 5

Бренд: Kenwood Страницы: 7

Бренд: YORKVILLE Страницы: 22

VGP-XL1B2 - Vaio Digital Living System Media Changer

Бренд: Sony Страницы: 141

Бренд: welland Страницы: 2

Бренд: TRENDnet Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды