HP StorageWorks D2700 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 80

background image

Option ROM Configuration for Arrays (ORCA)

Before installing an operating system, you can use the ORCA utility to create the first logical drive,
assign RAID levels, and establish online spare configurations.

The utility also provides support for the following functions:

•

Reconfiguring one or more logical drives

•

Viewing the current logical drive configuration

•

Deleting a logical drive configuration

•

Setting the controller to be the boot controller

If you do not use the utility, ORCA defaults to the standard configuration.

For more information about array controller configuration, see the controller user guide. For more
information regarding the default configurations that ORCA uses, see the HP ROM-Based Setup Utility
user guide.

Smart Components for firmware updates

Firmware updates on the controller, disk enclosure, and disk drives are performed using HP Smart
Components. Smart Components are available from the following locations:

•

Firmware Maintenance CD

•

HP support website for the controller, disk enclosure, or disk drive

A Firmware Maintenance CD is shipped with each server, with the latest version of the Firmware
Maintenance CD available on the HP SmartStart website:

nl

http://h18006.www1.hp.com/products/servers/management/smartstart

.

NOTE:

Not all available Smart Components are included on the Firmware Maintenance CD. Newly-released
Smart Components might be scheduled for inclusion on a future release of the CD, and some Smart
Components might not be scheduled for inclusion on the CD and be available exclusively via the HP
support website for the product.

To update device firmware using a Smart Component:

1.

Find the most recent version of the component that you require, knowing that it might be on the
Firmware Maintenance CD or the HP support website.

2.

Follow the instructions for installing the component. Instructions are provided with the CD and
on the same website as the component.

Configuration

46

«
...
44
45
46
47
48
...
»

Содержание StorageWorks D2700

















































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks D2700

Бренд: ABB Страницы: 2

Бренд: ZALMAN Страницы: 7

TrueNet Rack Mount Fiber Enclosures RMG Series

Бренд: ADC Страницы: 8

Бренд: Martin Audio Страницы: 31

Бренд: Emerson Страницы: 97

Бренд: Apevia Страницы: 11

Element T VK9000 Series

Бренд: Thermaltake Страницы: 12

Element V NVIDIA Edition

Бренд: Thermaltake Страницы: 19

Бренд: Kicker Страницы: 16

Бренд: Conceptronic Страницы: 106

Бренд: Digifast Страницы: 30

TotalStorage FAStT EXP700

Бренд: IBM Страницы: 100

Бренд: Diablotek Страницы: 1

SmartRack SRWF5U36

Бренд: Tripp Lite Страницы: 2

Бренд: CRU Страницы: 2

Бренд: HornetTek Страницы: 16

Бренд: Moog Videolarm Страницы: 15

Freedom Dome LDW75C2N

Бренд: Moog Videolarm Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды